-
Twin
One Reflow with Two independent system allows
space utilization in max. and increase of productivity- - Realize mixed production with separate profile operation of PCB TOP/BOTTOM
- - Doubled productivity in max. compared to general Reflow model
- - Able to support Partial PM function during front/rear operation
-
Dual
Identical profile with two conveyors doubled productivity
- - Doubled productivity in max. compared to Single Lane
- - Separate or simultaneous operation of front/back conveyors
- - Correspond 400mm in max. width
- - Fixed Axis placement tailored to customers’ need
-
Embedded (PSA)
Innovative space and design realized attributed
from mounting Nitrogen Generator on inside of
Reflow as an embedded type- - No extra space due to an embedded PSA inside of Reflow
- - Controllable PSA from Reflow through a micro remote control
- - Reduce approximately 30% of its energy through interface operation between Reflow and PSA
-
2 FMS
Doubled mounted FMS, enhanced for its power
allows collection rate of Flux.
Consequently, keeping the oven clean all the time.- - Excellent flux collection and cooling capability
- - One touch detachable mounting
- - Reduced PM time with spare FMS
-
For semiconductors
Dedicated Reflow, optimized for semiconductor process
dramatically improves productivity and quality- -SECS/GEM
- - The best safety features
- - Flip chip processing
- - Module processing
- - Stack processing
- - Solder ball processing
-
Single Side
PCB TOP/BOTTOM’s surface with temperature
deviation of 70˚C or more
Non-heat resistant parts allowing Reflow Soldering- - Replacement of wave soldering
- - Significant reduction of soldering defect rate
- - Reduce afterwork (Repair)
-
For LED
Realize stable profile of
Large Board for LED- - Specialized in boards for bar type LED,
longer than 1meter using Jig - - Realize the best productivity
when applied with Dual lane
- - Specialized in boards for bar type LED,